UK Frame Screw Crimping Terminal UKK3

Basic Info.

Model NO.	UKK3
Usage	Wire Connection
Connection Method	Screw Connection
Transport Package	Carton
Specification	As standard drawing
Trademark	ANHUANG
Origin	China

Product Description

Product description:
UKK3 adopts frame screw crimping structure, upper and lower double layer design, four wire pressing frame adopts 2.5-square-meter wiring capacity, current overload capacity 32A, voltage bearing capacity · force 500V.
The product adopts the same shape size as UKK5 in dimension design, only slightly different in thickness, so the same type of products can be used in baffle and installation guide rail.
1.Parameter

International product standards:	IEC60947-1	GB14048
Rated Voltage Current:	600V	32A
Standard Wiring Range:	Minimum Wire Diameter 0.2mm	Maximum Wire Diameter 2.5mm
Contact Material:	Brass H58 (body galvanized brass, screws galvanized iron)
Insulator Material:	PA66 Engineering Plastics
Flame Retardant Grade:	94-V-0
Product Standard Size:	Thickness is 5.2mm	Width is 56 mm	Height is 60.7 mm

2. Size

1).UKK3 double-layer terminal baffle D-UKK3/5 is suitable for UKK3 and UKK5 double-layer terminals.
2).ZB5 series is used for the 2 marks. The numbers include 1-100, and the orange marks 10-100 are available for selection. Special requirements can be customized.
3).Fb110-5 is used for center type bridge, which is suitable for all terminals with thickness of 5.2 chamber meters.
4). Fasteners for UKK3 double-layer terminals are E/UK,EW-35,SUK-E,E/AL-NS-35.
5). marking terminals and clip models are UK-B1,UBE/D,KLM-A.
3.Product accessories

UKK3 double layer terminal height 62 mm, width 56 meters, thickness 5.2 meters, suitable for a variety of 2.5 square meters wiring environment, this product with the upper and lower double layer characteristics can effectively reduce the length of guide pin installation and reduce the construction time.
The upper layer of the product can be short-circuited with a bridge. As the thickness of the product is 5.2 mm, it can be short-circuited with FB10-5.
The marker bar is ZB5.